PRODUCTS
PAGE 2 OF 13
Ateis DIVA Wall Mounted Cabinet Remote Paging Console
Ateis DIVA Wall Mounted Cabinet Remote Paging Console
AT-DIV-CD16-G2
Wall-mount heavy duty remote paging console with Access level 2 protection to comply with the EN 54-16. Compatible with DIVA8 System and communicates over a dedicated RS485 for Power, audio and DATA.?The unit comprises of 8/16 zones / 8/16 buttons with fist firemen?s microphone in a metal?surface mount wall-box. It provides robust IP-30 protection. Each CD contains a PSM Master?PCB with extension keypad and uses the same architecture as for the PSM series of microphone?consoles. Each DIVA8 System can handle up to 32 CD16 units with a maximum of 10 on one line?in Master/Slave configuration. (Note that only the Master unit is secured, Slaves are not).?The buttons can represent a single zone or a group of zones. All buttons can be programmed?with drag & drop features from the DIVA8 System and the PTT button can be programmed for?Push To Talk or for latching functionality.The unit offers ?Hold? and ?Busy? LED signals in addition to the zone LED?s, and these allow?the easy identification of selection / Busy signals for the user. In addition, to comply?with EN 54-16, separate POWER, FAULT and EVAC indicators are provided.?Additional RCA connectors with selection buttons support local audio injection for?commercial usage.?The RS485 communication protocol offers daisy chaining of up to 300 m on a simple CAT5?cable, and yet makes outlets easy to connect via a standard RJ45 connector.
Ateis DIVA Wall Mounted Cabinet Remote Paging Console
Ateis DIVA Wall Mounted Cabinet Remote Paging Console
AT-DIV-CD-TOUCH-G2
The CD-TOUCH paging console is a paging interface that allows call-paging, message broadcasting and DSP matrix parameter control. It contains a 5? full-color backlit touch-screen for simple, user-friendly operation. The screen offers up to 168 buttons across 14 pages which can be freely assigned in the software to any zone or group of zones. Each key contains a color-changing field indicating if the zone is occupied by a different process. In addition, the CDTOUCH has 3 hardware keys that can be assigned within the system control software.All paging parameters for site operation can be pre-programmed and stored within the console, including message triggering, level adjustment and pre-call chime setup. Zone assignment, naming and grouping can also be pre-configured. The CD-Touch-XX units connect to a monitored bus on CAT-5 FTP/STP. This connection also provides Power Over Ethernet (POE). In case POE is not available, or if the cable run is greater than 100m, an additional power connection is provided with 24 VDC supply. The ATE?S range of security systems complies with current architectural demands requiring IP and/or fiber-optic networking to allow for even the most complex of system designs. ATE?S responds to Public Address and Voice Alarm requirements as stated in EN54-16, ISO 7240-16 and BS5839/8, with specific attributes for compliance in large installations. CD-TOUCH is available in two different versions with identical hardware and functionality but different firmware for compatibility with different systems.
Ateis DPA 4x125w Bridge Power Amplifier, Rackmount
Ateis DPA 4x125w Bridge Power Amplifier, Rackmount
AT-DPA-DPAfour125
The DPAfour125 is a 2U high 19? rack mountable, 4-channel class-D power amplifier, transformer isolated for 100 V, 70 V, 50 V and low-impedance distributed loudspeaker systems. Each amplifier can deliver up to 1000 Watt when used in bridged mode or in separate channels of 125 or 250 Watt.?This amplifier has a dual voltage mains 110/230 VAC and a 24 VDC battery back-up input which allows it to be used in combination with a battery backup system for maximum availability and durability in an emergency evacuation system. There are 3 types of power amplifiers available in the DPA four range of products.
Ateis DPA 4x250w Bridge Power Amplifier, Rackmount
Ateis DPA 4x250w Bridge Power Amplifier, Rackmount
AT-DPA-DPAfour250
The DPAfour250 is a 2U high 19? rack mountable, 4-channel class-D power amplifier, transformer isolated for 100 V, 70 V, 50 V and low-impedance distributed loudspeaker systems. Each amplifier can deliver up to 1000 Watt when used in bridged mode or in separate channels of 125 or 250 Watt.This amplifier has a dual voltage mains 110/230 VAC and a 24 VDC battery back-up input which allows it to be used in combination with a battery backup system for maximum availability and durability in an emergency evacuation system. There are 3 types of power amplifiers available in the DPA four range of products.
Ateis ECS Networked Echo Cancellation - 12in, 8out, 12AEC
Ateis ECS Networked Echo Cancellation - 12in, 8out, 12AEC
AT-ECS-ECS323
The ECS Networked Echo Cancellation System is a digital signal processor featuring DYNAMIC Automatic Echo Cancellation based on our own developed wideband acoustic echo cancellation algorithm.Design specifically to provide outstanding clear audio in teleconferencing applications. The ECS delivers true 20 Hz to 22 kHz bandwidth during multiple participant conversations, with natural full duplex transmission of speech with no latency, including double talk.The ECS Networked Echo Cancellation System is a digital signal processor featuring an impressive DYNAMIC Automatic Echo Cancellation based on our own developed wide band acoustic echo cancellation algorithm. ECS is designed specifically to provide outstanding clear audio in teleconferencing applications. The ECS delivers true 20 Hz to 22 kHz bandwidth during multiple participant conversations, with natural full duplex transmission of speech with no latency, including double talk. Special designed features like Local Echo Suppressor, Noise reduction, Remain Echo Suppressor and Voice Gate greatly improve the audio quality of your teleconferencing system.ECS features up to 16 wide-band AEC software modules and up to 24 configurable hardware electronically balanced inputs and/or outputs, telephone interface with line & set connections, Ethernet port for software configuration/control, serial port for third-party RS-232 remote control and remote control bus (RS485) for dedicated control panels like the URC-programmable remote controllers. Thanks to this modularity, the ECS can be used in small or big systems. With ECS pay for what you need.Driven by the intuitive ATE?S STUDIO graphical user interface, the ECS includes a broad selection of audio components, routing options and signal processing. Useful features like Automatic Gain Control, Feedback killers, Meters, Compressor-limiter, Equalizer, Matrix and Automatic Microphone mixers are also part of the ECS DSP component library.Internal processing of audio signals can be fully programmed to suit the client?s application with enhanced management. Installers can select the audio processing feature(s) that they wish to apply to the various inputs and outputs from a library on their PC, using software provided with the ECS. The internal system design is completely user definable via PC software, and can be controlled via dedicated software screens, third party devices like Crestron ?, AMX ? or Vity ?, and a variety of optional remote controls.Multi-unit ECS-systems can be created utilizing ATE?S NetLink which provides 48-channels broadband audio distribution, linking up to 32 units in a dedicated network creating a through 768 channels audio-conferencing system.The ECS system can use either telephone lines with the telephone interface or internet links thanks to a reliable VoIP stream with SIP protocol. Telephone hybrid capabilities include: initiation of outgoing calls detection and answering of incoming calls.
Ateis ECS Networked Echo Cancellation - 16in, 4out, 12AEC
Ateis ECS Networked Echo Cancellation - 16in, 4out, 12AEC
AT-ECS-ECS413
The ECS Networked Echo Cancellation System is a digital signal processor featuring DYNAMIC Automatic Echo Cancellation based on our own developed wide band acoustic echo cancellation algorithm. ECS is designed specifically to provide outstanding clear audio in teleconferencing applications. The ECS delivers true 20 Hz to 22 kHz bandwidth during multiple participant conversations, with natural full duplex transmission of speech with no latency, including double talk.? Powerful 48 channel Networking? ATEIS-Net ports with up to 32 multi-unit system designs? Powerful networked auto mixer, for up to 256 delegates within one system? Ethernet port for remote diagnostic and system configuration? Support IP telephone with SIP protocol and G.711 G.722 voice codec via Ethernet port? Up to 16 broad-band AEC software modules? Message player & Recorder? Ability to select, view and adjust within ATEIS-studio graphical user interface? Local Echo Suppressor
Ateis ECS Networked Echo Cancellation - 20in, 4out, 16AEC
Ateis ECS Networked Echo Cancellation - 20in, 4out, 16AEC
AT-ECS-ECS514
The ECS Networked Echo Cancellation System is a digital signal processor featuring DYNAMIC Automatic Echo Cancellation based on our own developed wide band acoustic echo cancellation algorithm. ECS is designed specifically to provide outstanding clear audio in teleconferencing applications. The ECS delivers true 20 Hz to 22 kHz bandwidth during multiple participant conversations, with natural full duplex transmission of speech with no latency, including double talk.? Powerful 48 channel Networking? ATEIS-Net ports with up to 32 multi-unit system designs? Powerful networked auto mixer, for up to 256 delegates within one system? Ethernet port for remote diagnostic and system configuration? Support IP telephone with SIP protocol and G.711 G.722 voice codec via Ethernet port? Up to 16 broad-band AEC software modules? Message player & Recorder? Ability to select, view and adjust within ATEIS-studio graphical user interface? Local Echo Suppressor
Ateis ECS Networked Echo Cancellation - 4in, 4out, 4AEC
Ateis ECS Networked Echo Cancellation - 4in, 4out, 4AEC
AT-ECS-ECS111
The ECS Networked Echo Cancellation System is a digital signal processor featuring DYNAMIC Automatic Echo Cancellation based on our own developed wideband acoustic echo cancellation algorithm.Design specifically to provide outstanding clear audio in teleconferencing applications. The ECS delivers true 20 Hz to 22 kHz bandwidth during multiple participant conversations, with natural full duplex transmission of speech with no latency, including double talk.The ECS Networked Echo Cancellation System is a digital signal processor featuring an impressive DYNAMIC Automatic Echo Cancellation based on our own developed wide band acoustic echo cancellation algorithm. ECS is designed specifically to provide outstanding clear audio in teleconferencing applications. The ECS delivers true 20 Hz to 22 kHz bandwidth during multiple participant conversations, with natural full duplex transmission of speech with no latency, including double talk. Special designed features like Local Echo Suppressor, Noise reduction, Remain Echo Suppressor and Voice Gate greatly improve the audio quality of your teleconferencing system.ECS features up to 16 wide-band AEC software modules and up to 24 configurable hardware electronically balanced inputs and/or outputs, telephone interface with line & set connections, Ethernet port for software configuration/control, serial port for third-party RS-232 remote control and remote control bus (RS485) for dedicated control panels like the URC-programmable remote controllers. Thanks to this modularity, the ECS can be used in small or big systems. With ECS pay for what you need.Driven by the intuitive ATE?S STUDIO graphical user interface, the ECS includes a broad selection of audio components, routing options and signal processing. Useful features like Automatic Gain Control, Feedback killers, Meters, Compressor-limiter, Equalizer, Matrix and Automatic Microphone mixers are also part of the ECS DSP component library.Internal processing of audio signals can be fully programmed to suit the client?s application with enhanced management. Installers can select the audio processing feature(s) that they wish to apply to the various inputs and outputs from a library on their PC, using software provided with the ECS. The internal system design is completely user definable via PC software, and can be controlled via dedicated software screens, third party devices like Crestron ?, AMX ? or Vity ?, and a variety of optional remote controls.Multi-unit ECS-systems can be created utilizing ATE?S NetLink which provides 48-channels broadband audio distribution, linking up to 32 units in a dedicated network creating a through 768 channels audio-conferencing system.The ECS system can use either telephone lines with the telephone interface or internet links thanks to a reliable VoIP stream with SIP protocol. Telephone hybrid capabilities include: initiation of outgoing calls detection and answering of incoming calls.
Ateis ECS Networked Echo Cancellation - 8in, 4out, 4AEC
Ateis ECS Networked Echo Cancellation - 8in, 4out, 4AEC
AT-ECS-ECS211
The ECS Networked Echo Cancellation System is a digital signal processor featuring DYNAMIC Automatic Echo Cancellation based on our own developed wideband acoustic echo cancellation algorithm. ECS is designed specifically to provide outstanding clear audio in teleconferencing applications. The ECS delivers true 20 Hz to 22 kHz bandwidth during multiple participant conversations, with natural full duplex transmission of speech with no latency, including double talk.Powerful 48 channel NetworkingATEIS-Net ports with up to 32 multi-unit system designsPowerful networked auto mixer, for up to 256 delegates within one systemEthernet port for remote diagnostic and system configurationSupport IP telephone with SIP protocol and G.711 G.722 voice codec via Ethernet portUp to 16 broad-band AEC software modulesMessage player & RecorderAbility to select, view, and adjust within ATEIS-Studio graphical user interfaceLocal Echo Suppressor
Ateis ECS Networked Echo Cancellation - 8in, 4out, 8AEC
Ateis ECS Networked Echo Cancellation - 8in, 4out, 8AEC
AT-ECS-ECS212
The ECS Networked Echo Cancellation System is a digital signal processor featuring DYNAMIC Automatic Echo Cancellation based on our own developed wideband acoustic echo cancellation algorithm.Design specifically to provide outstanding clear audio in teleconferencing applications. The ECS delivers true 20 Hz to 22 kHz bandwidth during multiple participant conversations, with natural full duplex transmission of speech with no latency, including double talk.The ECS Networked Echo Cancellation System is a digital signal processor featuring an impressive DYNAMIC Automatic Echo Cancellation based on our own developed wide band acoustic echo cancellation algorithm. ECS is designed specifically to provide outstanding clear audio in teleconferencing applications. The ECS delivers true 20 Hz to 22 kHz bandwidth during multiple participant conversations, with natural full duplex transmission of speech with no latency, including double talk. Special designed features like Local Echo Suppressor, Noise reduction, Remain Echo Suppressor and Voice Gate greatly improve the audio quality of your teleconferencing system.ECS features up to 16 wide-band AEC software modules and up to 24 configurable hardware electronically balanced inputs and/or outputs, telephone interface with line & set connections, Ethernet port for software configuration/control, serial port for third-party RS-232 remote control and remote control bus (RS485) for dedicated control panels like the URC-programmable remote controllers. Thanks to this modularity, the ECS can be used in small or big systems. With ECS pay for what you need.Driven by the intuitive ATE?S STUDIO graphical user interface, the ECS includes a broad selection of audio components, routing options and signal processing. Useful features like Automatic Gain Control, Feedback killers, Meters, Compressor-limiter, Equalizer, Matrix and Automatic Microphone mixers are also part of the ECS DSP component library.Internal processing of audio signals can be fully programmed to suit the client?s application with enhanced management. Installers can select the audio processing feature(s) that they wish to apply to the various inputs and outputs from a library on their PC, using software provided with the ECS. The internal system design is completely user definable via PC software, and can be controlled via dedicated software screens, third party devices like Crestron ?, AMX ? or Vity ?, and a variety of optional remote controls.Multi-unit ECS-systems can be created utilizing ATE?S NetLink which provides 48-channels broadband audio distribution, linking up to 32 units in a dedicated network creating a through 768 channels audio-conferencing system.The ECS system can use either telephone lines with the telephone interface or internet links thanks to a reliable VoIP stream with SIP protocol. Telephone hybrid capabilities include: initiation of outgoing calls detection and answering of incoming calls.
PAGE 2 OF 13