PRODUCTS
PAGE 1 OF 2
Ateis BPA 1x1000w Bridge Power Amplifier, Rackmount
Ateis BPA 1x1000w Bridge Power Amplifier, Rackmount
AT-BPA-BPA-1000
The BPA is a 2RU 19" rack-mountable, 2-channel amplifier, transformer isolated for 100 V, 50 V and 8 Ohm distributed loudspeaker systems.The BPA amplifier has a 230 VAC mains supply input and a 48 VDC battery back-up input which allows it to be used in combination with a battery backup system for maximum availability and reliability in an emergency evacuation system. BPA amplifiers have short-to-ground, short-circuit detection and line-impedance surveillance up to 5% deviation using the DIVA8G2 or IDA8 systems for loudspeaker-line surveillance. They support both single-spure and redundant loop cabling (A/B) and have a switchover facility that automatically reroutes power to a backup amplifier (if present) via the SONAES charger in the event of failure. BPA amplifiers have a rear-panel selector switch for amplifier monitoring according to EN 54-16.
Ateis BPA 2x120w Bridge Power Amplifier, Rackmount
Ateis BPA 2x120w Bridge Power Amplifier, Rackmount
AT-BPA-BPA-2120
The BPA is a 2RU 19" rack-mountable, 2-channel amplifier, transformer isolated for 100 V, 50 V and 8 Ohm distributed loudspeaker systems.The BPA amplifier has a 230 VAC mains supply input and a 48 VDC battery back-up input which allows it to be used in combination with a battery backup system for maximum availability and reliability in an emergency evacuation system. BPA amplifiers have short-to-ground, short-circuit detection and line-impedance surveillance up to 5% deviation using the DIVA8G2 or IDA8 systems for loudspeaker-line surveillance. They support both single-spure and redundant loop cabling (A/B) and have a switchover facility that automatically reroutes power to a backup amplifier (if present) via the SONAES charger in the event of failure. BPA amplifiers have a rear-panel selector switch for amplifier monitoring according to EN 54-16.
Ateis BPA 2x240w Bridge Power Amplifier, Rackmount
Ateis BPA 2x240w Bridge Power Amplifier, Rackmount
AT-BPA-BPA-2240
The BPA is a 2RU 19" rack-mountable, 2-channel amplifier, transformer isolated for 100 V, 50 V and 8 Ohm distributed loudspeaker systems.The BPA amplifier has a 230 VAC mains supply input and a 48 VDC battery back-up input which allows it to be used in combination with a battery backup system for maximum availability and reliability in an emergency evacuation system. BPA amplifiers have short-to-ground, short-circuit detection and line-impedance surveillance up to 5% deviation using the DIVA8G2 or IDA8 systems for loudspeaker-line surveillance. They support both single-spure and redundant loop cabling (A/B) and have a switchover facility that automatically reroutes power to a backup amplifier (if present) via the SONAES charger in the event of failure. BPA amplifiers have a rear-panel selector switch for amplifier monitoring according to EN 54-16.
Ateis BPA 2x480  Bridge Power Amplifier, Rackmount
Ateis BPA 2x480 Bridge Power Amplifier, Rackmount
AT-BPA-BPA-2480
The BPA is a 2RU 19" rack-mountable, 2-channel amplifier, transformer isolated for 100 V, 50 V and 8 Ohm distributed loudspeaker systems.The BPA amplifier has a 230 VAC mains supply input and a 48 VDC battery back-up input which allows it to be used in combination with a battery backup system for maximum availability and reliability in an emergency evacuation system. BPA amplifiers have short-to-ground, short-circuit detection and line-impedance surveillance up to 5% deviation using the DIVA8G2 or IDA8 systems for loudspeaker-line surveillance. They support both single-spure and redundant loop cabling (A/B) and have a switchover facility that automatically reroutes power to a backup amplifier (if present) via the SONAES charger in the event of failure. BPA amplifiers have a rear-panel selector switch for amplifier monitoring according to EN 54-16.
Ateis DPA 4x125w Bridge Power Amplifier, Rackmount
Ateis DPA 4x125w Bridge Power Amplifier, Rackmount
AT-DPA-DPAfour125
The DPAfour125 is a 2U high 19? rack mountable, 4-channel class-D power amplifier, transformer isolated for 100 V, 70 V, 50 V and low-impedance distributed loudspeaker systems. Each amplifier can deliver up to 1000 Watt when used in bridged mode or in separate channels of 125 or 250 Watt.?This amplifier has a dual voltage mains 110/230 VAC and a 24 VDC battery back-up input which allows it to be used in combination with a battery backup system for maximum availability and durability in an emergency evacuation system. There are 3 types of power amplifiers available in the DPA four range of products.
Ateis DPA 4x250w Bridge Power Amplifier, Rackmount
Ateis DPA 4x250w Bridge Power Amplifier, Rackmount
AT-DPA-DPAfour250
The DPAfour250 is a 2U high 19? rack mountable, 4-channel class-D power amplifier, transformer isolated for 100 V, 70 V, 50 V and low-impedance distributed loudspeaker systems. Each amplifier can deliver up to 1000 Watt when used in bridged mode or in separate channels of 125 or 250 Watt.This amplifier has a dual voltage mains 110/230 VAC and a 24 VDC battery back-up input which allows it to be used in combination with a battery backup system for maximum availability and durability in an emergency evacuation system. There are 3 types of power amplifiers available in the DPA four range of products.
Ateis MPA 120w Table-top Mixing Amplfier
Ateis MPA 120w Table-top Mixing Amplfier
AT-MPA-MPA-120
The MPA line of 5-channels AB-Class mixer amplifies are designed for use in permanent commercial sound installations. Versatile models are conservatively rated at 60, 120 and 240 Watts RMS into 8 ?, 70 and 100 Volt.
Ateis MPA 240w Table-top Mixing Amplifier
Ateis MPA 240w Table-top Mixing Amplifier
AT-MPA-MPA-240
The MPA line of 5-channels AB-Class mixer amplifies are designed for use in permanent commercial sound installations. Versatile models are conservatively rated at 60, 120 and 240 Watts RMS into 8 ?, 70 and 100 Volt.
Ateis MPA 60w Table-top Mixing Amplifier
Ateis MPA 60w Table-top Mixing Amplifier
AT-MPA-MPA-60
The MPA line of 5-channels AB-Class mixer amplifies are designed for use in permanent commercial sound installations. Versatile models are conservatively rated at 60, 120 and 240 Watts RMS into 8 ?, 70 and 100 Volt.Features include separate treble and bass controls, microphone, line and auxiliary inputs with built-in muting circuitry. Inputs and outputs are via dependable screw terminals, RCA jacks or XLR.?All models rest on four durable cushioned pads for table-top usage and are finished in black with easy-to-read. White-on-black knobs. Output protection consists of current limiting, transient suppression diodes and circuit breakers. Models come with detachable 1.5 m power cord.Models were designed with the accurate reproduction of voice announce, paging and background music in mind. They are ideally suited for applications such as restaurants, clubs, leisure industry, factories, retail stores, churches and other public areas.?The program section receives stereo inputs from CD-player or broadcast transmission players and reproduces it in monaural. A special AUX RCA jack is provided to receive post preamplifier sources.
Ateis SPA 2x120 Standard Power Amplifier, Rackmount
Ateis SPA 2x120 Standard Power Amplifier, Rackmount
AT-SPA-SPA-2120
The SPA (Security Power Amplifier) is primary designed for integration into Voice Alarm systems, but thanks to its flexibility, it can also be used for any Commercial application.?The SPA amplifiers were specifically developed to meet the requirements of EN 60849 for safety installations. Each amplifier module is fitted with its own 220 VAC/24 VDC power supply for increased system reliability.?To avoid handling errors, the volume output is set using the potentiometer located at the rear of the amplifier. Further to standard protection via fuses, SPA amplifiers also have electronic and thermal protection to protect them from potential hazards.?A ventilator provides forced cooling for the final power shelves and internal parts of the amplifier. It starts up automatically when the heat shunt reaches a certain temperature threshold, and stops when the temperature returns to normal values. Four LEDs display the status of each amplifier: AC or DC power supply, Line Overload and Temperature overload. Furthermore, a three LEDs Vu-Meter indicates the presence and level of audio signal.?A surveillance circuitry is continuously monitoring the temperature and the presence of AC and DC power supplies for both amplifiers. In case of a problem, the overload LEDs will be switched ON and the Fault relay will be activated.?The channels can be bridged together in order to create a single channel amplifier with twice the power.?
PAGE 1 OF 2